Will this system fit my Daly City building?

Fit depends on the complete storage and handling envelope. Share clear heights, doors, floor dimensions and loaded truck movements so the assessment includes access rather than rack dimensions alone.

Can I choose arms by bundle weight alone?

No, arm length and the manufacturer's loading assumptions also matter. Confirm how the load bears on each arm and how the proposed levels affect total column loading.

Should palletized cartons go on this system?

Selective pallet rack is generally preferable for conventional palletized cartons. Cantilever rack addresses long-load access; evaluate each inventory group before assigning it to a storage type.

Can I add levels after installation?

Additional levels require verified component compatibility and a capacity review. Supply the existing configuration and documentation, then assess the complete loaded column before purchasing more arms.

Cantilever Rack system inside a California warehouse

Daly City, California

Cantilever Rack in Daly City, CA

Cantilever rack in Daly City creates accessible positions for long materials using arms connected to uprights, with no front columns across the loading face. Bar, pipe, tube, lumber and bulky sheet loads need a layout that accommodates their lengths without sacrificing receiving space. Support geometry matters as much as the number of levels.

Trade supply and retail replenishment around Bayshore and the Geneva Avenue corridor can place different demands on the same building. Long stock needs room for withdrawal, while boxed merchandise needs its own picking positions. Plan those activities separately before trying to fit another storage row into the remaining floor area.

(415) 430-9104

Cantilever storage rack selection details

Indoor and outdoor applications call for a material and finish review based on exposure. Describe moisture conditions, weather contact and the stored product rather than requesting a coating by appearance alone. Confirm that the selected system and accessories suit the proposed environment.

Long sheet loads may need continuous bearing or an approved supporting surface depending on orientation and flexibility. Do not assume bare arms suit every panel pack. Discuss withdrawal methods, edge protection and any accessories as part of the load assessment.

When extending existing storage, verify the manufacturer and connection details before ordering additions. Arm fit alone does not establish acceptable loading. Review bracing, bases, column capacities and the revised level arrangement together, retaining documentation for future changes.

Trade counters holding pipe, tube and trim where employees need direct access to individual lengths.

Workshops organizing lumber and bar near cutting stations while keeping material clear of circulation routes.

Mixed inventory buildings placing long loads on arms and conventional pallet goods in selective pallet rack.

Daly City warehouse storage Cantilever system details Pallet flow alternatives Drive-in storage options

Call (415) 430-9104

Why cantilever rack deserves a load review

An open face allows a long bundle to approach several arms together. It does not eliminate the need to match arm length to load depth or distribute support along the material. Flexible lengths and sheet packs can require closer support spacing than comparatively stiff stock.

Perimeter storage may favor single-sided columns, provided the base and handling approach fit the site. Double-sided rows require access on both sides and can affect circulation between receiving and dispatch. Compare usable positions against the entire operating footprint, not just the steel occupying the floor.

As a division of Warehouse Equipment & Supplies Co., San Francisco Pallet Rack draws on supplying and installing storage equipment since 1997. Your proposal should define the selected arrangement, component requirements and installation scope without substituting a generic layout for the building assessment.

Free Design Consultation

CAD layout with position counts

Delivery and installation coordination

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Local Warehouse Planning

Bayshore distribution space should retain a route from unloading to material positions without crossing order assembly unnecessarily. In the Geneva Avenue corridor, trade supply planning also needs to account for individual-piece collection. Discuss access from US-101 and I-280 alongside actual entrance dimensions, delivery vehicle size and receiving restrictions.

local distribution

trade supply and retail replenishment

How we evaluate cantilever racking access

Treat the cantilever rack layout as a handling study as well as a storage drawing. The longest load, deepest bundle and heaviest position may each represent a different item.

Separate material categories

Document dimensions, weight and quantity for each group. Identify loose lengths, strapped packs and sheet bundles separately. Note how packaging changes after opening, because a partially depleted position can behave differently during picking.

Locate every bearing point

Review upright spacing against the shortest and longest products intended for each position. Select arm projection for load depth, then verify arm and column ratings. Multiple supports need appropriate load distribution rather than an assumed equal share.

Model the loaded vehicle

Confirm the actual loaded envelope for the proposed forklift or side-loader. Include projecting ends, turning movement and the approach needed to enter a position. Check doorways and transitions between aisles, not only the straight travel distance.

Define site preparation

Identify base locations before finalizing installation. Establish a separated work zone and an unloading area that does not become permanent material storage. Review the completed configuration before loading inventory into its assigned positions.

Recent Installations

Pallet rack installations from our existing project gallery.

View More Projects

Start a Daly City cantilever rack proposal

Provide an inventory list and a floor sketch showing doors, columns and work areas. Include handling equipment information and photographs of any existing rack. The quotation can then identify the storage arrangement and the responsibilities associated with installation. (415) 430-9104.