Does a lower Hayward building rule this out?

No. Available height affects level count and lifting clearance, but suitability also depends on load dimensions, support needs and the floor area available for handling.

How much aisle space is necessary?

It depends on the truck and load. Measure the complete maneuver with the longest material, including attachments and any clearance needed to approach the arms.

Is double-sided always the better choice?

No. Two loading faces help only when both remain accessible. Perimeter conditions, travel paths and base footprint can favor a single-sided arrangement.

Can arm ratings simply be added together?

Not without checking load distribution. Confirm how the bundle bears on each arm and verify the upright assembly’s limits for the proposed loading arrangement.

Cantilever Rack system inside a California warehouse

Hayward, California

Cantilever Rack in Hayward, CA

Cantilever rack in Hayward supports long inventory on arms fixed to uprights, leaving the front free of columns. That open face suits bar, pipe, tube, lumber and properly supported sheet materials when conventional pallet openings interfere with loading or retrieving the full length.

For light manufacturing and auto aftermarket operations, the storage question extends beyond fitting more material indoors. The arrangement must preserve identification, access to partial bundles and room for handling equipment while fitting the building’s actual clear height and the sequence of daily work.

(415) 430-9104

Details that shape cantilever storage rack selection

Material and finish selection should reflect the installation environment. Indoor humidity or process exposure can matter, while outdoor storage introduces weather and drainage considerations. Confirm that the proposed assembly and stored products suit the intended location.

Sheet material may need approved support surfaces or accessories to avoid inappropriate point contact and sagging. The right arrangement depends on pack rigidity, handling method and manufacturer requirements, not simply whether the sheet fits across the arms.

Selective rack remains worth considering for pallet goods that need direct pallet access. A mixed layout can assign long stock to open arms and packaged inventory to pallet positions, reducing compromises between two distinct load formats.

Tube bundles for manufacturing replenishment.

Long aftermarket components requiring visible access.

Lumber and sheet packs with defined supports.

Hayward warehouse storage Cantilever system details Pallet flow alternatives Drive-in storage options

Call (415) 430-9104

Why cantilever racking fits long inventory

Arm reach follows load depth, not merely the space available beside an aisle. Too little bearing area can leave material inadequately supported; unnecessary reach consumes handling space. Establish the product envelope before selecting arm lengths and level positions.

Capacity requires a complete view of arms, uprights and bases. A bundle spread across several supports does not necessarily divide its weight equally. Uneven contents, packaging and material stiffness can create different reactions at individual supports.

Since 1997, this division of Warehouse Equipment & Supplies Co. has supplied and installed warehouse equipment. The planning conversation connects these equipment choices with your floor layout, material information and access requirements rather than starting with a standard row arrangement.

Free Design Consultation

CAD layout with position counts

Delivery and installation coordination

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Local Warehouse Planning

West of I-880 and near the SR-92 connection, Hayward’s industrial properties include older tilt-up buildings and newer infill space. Mt. Eden and the wider industrial corridor serve manufacturing and distribution activity. Lower-clear buildings call for careful arm elevations; newer space still needs a measured layout that respects columns, loading approaches and the separation between long-material handling and boxed inventory.

light manufacturing

auto parts and distribution

How cantilever rack planning addresses the building

Start at the receiving point and follow a representative bundle to storage and retrieval. That walkthrough reveals constraints a rack footprint alone cannot show.

Define each material group

Separate rigid sections from flexible lengths and sheet packs. Record bundle weights, depths and lengths, plus the smallest remaining quantity that operators expect to retrieve without moving unrelated material.

Establish support and level spacing

Set upright spacing to limit unsupported spans, then match arm capacity to expected reactions. Leave vertical room for the load, lifting movement and retrieval method instead of stacking levels by material thickness alone.

Compare row arrangements

A single-sided configuration can work along an appropriate perimeter. Double-sided storage offers two loading faces but needs access on both sides; evaluate base dimensions and usable aisle space before choosing between them.

Validate trucks and existing equipment

Check forklift maneuvering with full-length loads or side-loader access along the row. For an extension, verify manufacturer, connection design and component ratings rather than relying on an apparent dimensional match.

Recent Installations

Pallet rack installations from our existing project gallery.

View More Projects

Discuss Hayward cantilever rack requirements

For cantilever rack planning, bring building dimensions, clear-height measurements and representative load details. Photographs of receiving routes and any existing rack identification help focus the discussion on practical storage positions, handling clearances and the information still needed before equipment selection. (415) 430-9104.