Can older San Leandro buildings accommodate this?

Potentially, yes. Suitability depends on measured space, equipment requirements and handling access; building age alone does not determine whether the storage arrangement will work.

How do I choose support spacing?

Start with the material’s stiffness and support requirements. The spacing must address sagging, overhang and load reactions rather than simply matching an existing row.

Can a perimeter row become double-sided?

Only after evaluating the complete configuration. The assembly, bases and loading arrangement must support that use, and operators need a workable aisle on the additional side.

Should pallet goods share these arms?

Not automatically. Compare the pallet and its bearing requirements with the proposed supports; selective pallet storage may provide a clearer arrangement for routine pallet handling.

Cantilever Rack system inside a California warehouse

San Leandro, California

Cantilever Rack in San Leandro, CA

Cantilever rack in San Leandro holds long materials on arms fixed to uprights, with no front columns blocking the loading face. Bar, pipe, tube, lumber and sheet products can benefit from that access when their length makes conventional pallet storage awkward.

In a building combining manufacturing, packaging and distribution, long-material storage needs a clearly assigned role. The arrangement should make incoming stock accessible without turning production approaches or order assembly areas into overflow locations for bundles awaiting a permanent position.

(415) 430-9104

Why cantilever racking fits long-material workflows

The open front allows access across a material’s length, while arm positions define its support. Choose arm reach from actual load depth and handling needs, not from an assumption that longer arms always create more useful storage.

Load distribution determines what each support carries. A bundle with uneven contents can place greater weight on one arm even when its total weight appears acceptable. Confirm individual support reactions alongside the upright assembly’s overall loading limits.

Warehouse Equipment & Supplies Co. is our parent company; this division has supplied and installed warehouse equipment since 1997. Equipment planning begins with measured loads, building constraints and component identification so the proposed arrangement addresses the operation rather than a generic storage footprint.

Free Design Consultation

CAD layout with position counts

Delivery and installation coordination

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Local Warehouse Planning

Davis Street and Marina Boulevard connect San Leandro’s older industrial properties with I-880, while I-580 supports wider movements. Food processing, light manufacturing and distribution can share nearby industrial settings but have different material-access needs. Within an older building, column locations, doorway approaches and existing work areas should guide row orientation before storage height or the number of arms is selected.

food processing

distribution and light manufacturing

Cantilever storage rack details worth resolving early

Indoor and outdoor locations need different exposure assessments. Review moisture, process conditions and weather when selecting materials and finishes, and confirm that both the rack assembly and the stored product suit the proposed setting.

Sheet materials need bearing arrangements that reflect pack stiffness and surface sensitivity. Approved decking or accessories may be appropriate, but their suitability must be established for the load and equipment rather than added as an assumed universal solution.

Selective pallet rack is generally more appropriate for pallet goods needing individual pallet retrieval. Keeping boxed distribution inventory separate from long sections can preserve access to both without forcing different handling methods into the same positions.

Long sections supporting light manufacturing.

Pipe bundles needing clear product separation.

Lumber or sheet packs with documented supports.

San Leandro warehouse storage Cantilever system details Pallet flow alternatives Drive-in storage options

Call (415) 430-9104

How cantilever rack layouts address existing space

Build the layout around the material route first. A rack that fits on the drawing still needs workable approaches for receiving, replenishment and retrieval throughout the shift.

Separate load families

Record lengths, bundle depths, weights and material flexibility. Distinguish sheet packs from rigid sections, and identify partial bundles that need continued access after their original wrapping or banding changes.

Select the support geometry

Establish upright spacing and allowable overhang from the material’s support requirements. Match arm reach to bearing depth, then check arm capacities and assembly ratings for the intended loading pattern at every level.

Choose the loading faces

Single-sided storage can suit an appropriate boundary, whereas double-sided rows provide two accessible faces. Account for projecting bases and working aisles on the relevant sides before comparing their total space requirements.

Confirm handling and equipment continuity

Allow forklift turning room for the longest bundle or verify side-loader access along the storage face. Identify existing rack components and obtain compatibility confirmation before combining arms, uprights or connection systems.

Recent Installations

Pallet rack installations from our existing project gallery.

View More Projects

Discuss San Leandro cantilever rack options

Begin your cantilever rack review with a measured floor sketch, representative material dimensions and available truck information. Include existing rack labels, arm connections and photographs of constrained approaches so the planning discussion can identify what fits and what requires further verification before selection. (415) 430-9104.