What dimensions do you need for a Berkeley quote?

Provide load length, depth, height and weight, plus the available floor area. Include your longest piece and heaviest bundle so the proposal addresses both support geometry and loading.

Can I store pallets on these arms?

Selective pallet rack is generally the better starting point for conventional pallet goods. Cantilever rack should be evaluated for long materials, with any proposed pallet application specifically reviewed.

Should I choose single-sided or double-sided storage?

Choose according to loading access and the complete aisle footprint. A double-sided row needs usable handling space on both faces; a perimeter position may favor single-sided equipment.

Can additional arms fit my existing uprights?

Only components with verified compatibility and acceptable loading should be added. Supply identification, connection photographs and existing documentation before ordering arms or changing levels.

Cantilever Rack system inside a California warehouse

Berkeley, California

Cantilever Rack in Berkeley, CA

Cantilever rack in Berkeley puts long materials on arms attached to uprights, without front columns interrupting access. Bar, pipe, tube, lumber and bulky sheet bundles need support that matches their dimensions and flexibility. The arrangement should let operators withdraw a full bundle or individual piece without dragging adjacent material into the handling path.

For West Berkeley fabrication and research supply operations, storage belongs in the production conversation. Materials moving toward cutting tables or assembly benches need an accessible route, not simply an empty rack position. Along the Gilman Street corridor, review receiving, processing and dispatch together before assigning the available floor area.

(415) 430-9104

Why cantilever rack suits fabrication stock

Open-front access accommodates lengths that do not fit neatly between pallet rack frames. Arm length must support the load depth, while upright spacing determines where support occurs along each piece. Flexible tubing and sheet packs may require additional support points rather than wider gaps between columns.

A single-sided arrangement can serve a perimeter location when its base and loading clearances fit. Double-sided rows offer access from two aisles, but both faces require working space. Compare the complete footprint, including bases and vehicle movements, instead of counting arms alone.

San Francisco Pallet Rack is a division of Warehouse Equipment & Supplies Co., supplying and installing storage systems since 1997. For this equipment, the proposal should connect material dimensions, handling methods and documented capacities so purchasing decisions reflect the intended arrangement.

Free Design Consultation

CAD layout with position counts

Delivery and installation coordination

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Local Warehouse Planning

West Berkeley's light fabrication work makes the path between material storage and machinery particularly important. Identify building columns, door openings and assembly areas on the drawing. Receiving access associated with I-80 and I-580 should inform delivery discussions, while the actual site entrance determines unloading and staging arrangements.

food production

research supply and light fabrication

How we plan cantilever racking

Begin the cantilever rack review with representative loads, including awkward lengths and partially depleted bundles. A layout based only on the most common item can overlook the material that creates handling difficulties.

Record the material range

List maximum and minimum lengths, bundle depths, weights and quantities. Separate rigid bar from flexible tube, lumber and sheet material. Note whether operators retrieve complete bundles or select individual pieces during production.

Establish supported positions

Choose arm projection and upright spacing together. Check individual arm ratings, total column loading and the load distribution assumed by the manufacturer. Multiple supports must share the material appropriately; dividing total weight by arm count is not sufficient verification.

Trace loaded movements

Evaluate the actual loaded envelope of the forklift or side-loader, including projecting material, turning sweep and approach angle. Demonstrate movement from receiving to storage and onward to cutting without relying on the truck's unloaded dimensions.

Confirm the installation arrangement

Review base placement and separation from active work. Establish unloading space and installation boundaries before equipment arrives. Retain the approved arrangement and capacity information for subsequent stocking decisions.

Cantilever storage rack specification checks

Indoor storage and outdoor exposure require different material and finish discussions. Describe moisture, weather exposure and the material being stored before selecting a finish. Outdoor suitability concerns the complete system and its application, not merely whether one component has a protective coating.

Sheet goods need particular attention to bearing surfaces and withdrawal. Depending on orientation, dimensions and flexibility, a supported platform or another storage arrangement may be appropriate. Confirm any decking or accessories with the system supplier rather than placing loose panels across unsupported gaps.

For future additions, identify the manufacturer, connection geometry, arm type, bracing and available capacity documentation. Similar appearance does not establish compatibility. Reassess the complete run when extending it or changing arm elevations, especially if heavier materials will enter the same area.

Metalworking operations separating bar, pipe and tube by size while keeping individual lengths accessible.

Woodworking teams staging lumber near cutting equipment without turning production aisles into overflow storage.

Mixed facilities assigning long bundles to supported arms and ordinary pallet goods to selective pallet rack.

Berkeley warehouse storage Cantilever system details Pallet flow alternatives Drive-in storage options

Call (415) 430-9104

Recent Installations

Pallet rack installations from our existing project gallery.

View More Projects

Request a Berkeley cantilever rack layout

Send a floor plan, material list and handling equipment details. Include photographs of intended storage locations and any existing components you hope to retain. The quotation discussion can then distinguish equipment, accessories and installation responsibilities. (415) 430-9104.